|Face||100% PVC Free Polyurethane|
|Weight||17.3 oz. per linear yd
|Ends/Picks||Ends: 0 per inch
Picks: 0 per inch
Ratio: 90% Water / 10% Bleach Solution
|Free of Conflict Minerals||Yes|
|Free of Heavy Metals||Yes|
|16P Phthalate Free||Yes|
|Abrasion Resistance ASTM D4157||100,000 double rubs|
|Tensile Strength CFFA-17||Warp: 110.0 lbs.
Fill: 112.0 lbs.
|Tear Strength||Warp: 22.0 lbs.
Fill: 13.8 lbs.
|UV Resistance CFFA-2||500 hours|
|Cold Crack CFFA-6||-20° F|
|CAL TB 117-E||Passes|
|NFPA 260||Class 1|
|ASTM E-84||Class A or 1|
|BIFMA CS-191-53, Sec. 3||Passes|
|BIFMA Upholstery, Sec. 4||Passes|
|Please refer to Detailed Cleaning Instructions.|
|Although we try hard to make sure colors on our site are accurate, actual colors may vary. Please order samples prior to making a purchase.|
|The use of polyurethane for welt cord in upholstery applications is strongly discouraged. Even though Burch's polyurethane products are designed to exceed industry abrasion standards, when used with welt cord the exposed material becomes more vulnerable to abrasion and may experience premature de-lamination. Burch cannot be held responsible for damage that may occur when used in a welt cord application.|
|Final determination of the suitability of this product for an application rests with the user.|
|Proposition 65 Warning: Yes|
|** This term and any corresponding data refer to the typical performance in the specific tests indicated and should not be construed to imply the behavior of this or any other material under actual fire conditions.|